This code example demonstrates how to use controller area network flexible data-rate (CAN FD) in XMC7000 MCU devices.

This example demonstrates how to use the inter-processor communication (IPC) driver to implement a message pipe in XMC7000 MCU. This example contains how to use the IPC low level I/F. The low level I/F directly controls the IPC.

This code example demonstrates how to enter the DeepSleep and Hibernate mode, and wakeup using the RTC alarm.

This example demonstrates the useof I2C (HAL) resource for PSoC6 MCU in Master mode with an EzI2C slave

This example shows how to configure XMC7000 MCWDT Subcounter0/1 and Subcounter2 operation with interrupt.

This example demonstrates the usage of the real-time clock (RTC) in PSoC 6 MCU. It shows how to get and set the time in the RTC using the RTC driver API.

This example uses the smart I/O peripheral in XMC7000 MCU to connect the button input pin to an output pin to toggle an external LED.

This is a minimal starter multi-core application template for XMC7000 devices.

This code example demonstrates the generation of asymmetric PWM signals using two compare/capture registers available in the TCPWM block of XMC7000 MCU devices.

This example demonstrates the fault handling functionality of XMC7200 evaluation kit.

This example demonstrates interfacing with an external NOR flash memory in Quad-SPI mode using the Serial Memory Interface (SMIF) block in PSoC 6 MCU.

This example demonstrates the use of the SPI serial communication block (SCB) resource for Infineon MCU in master and slave mode using DMA.

This code example demonstrates how to use the XMC7000 MCU event generator (EVTGEN) resource to trigger ADC conversion in active power mode.

This example uses the Arm® Cortex®-M7 (CM7_0) CPU of the XMC7000 MCU to execute two tasks: UART communication and emulate EEPROM behavior in flash memory.

This example demonstrates the operation of the I2C (HAL) resource for PSoC 6 MCU in Slave mode using callbacks

This code example shows how to generate a 32-byte hash value or message digest for an arbitrary user input message with the SHA-2 algorithm using the Cryptographic hardware block in the MCU.

This example is the out-of-the-box (OOB) demo project for the KIT_XMC72_EVK XMC7200 evaluation kit.

This code example demonstrates how to use the SysTick timer to generate a timer interrupt on xmc7000 MCU.

This example demonstrates how to transition XMC7000 MCU to the Active, Sleep, DeepSleep, and Hibernate power states, and how to wake up and return to Active state.