Integrate Shelly 3EM smart meter into Victron Energies Venus OS

Battery Monitor driver for serial battery in VenusOS GX systems

This Venus OS driver gets the data from MQTT and displays it as pv inverter.

This Venus OS driver gets the data from MQTT and displays it as grid, genset or ac load meter.

This Venus OS driver gets the data from MQTT and displays it as battery.

This script allows you to backup your Raspberry Pi to a SMB/CIFS share on a NAS/computer without removing the SD card.

Integrate Hoymiles microinverter into Victron Energies Venus OS

Integrate Open_EVSE charger into Victron Energies Venus OS

This Venus OS driver gets the data from MQTT and displays it as solar charger.

This Venus OS driver gets the data from the Enphase Envoy-S and displays it as PV Inverter. It works for all phase combinations. Additionally it's possible to post the data to multiple MQTT topics to get more detailed informations/monitoring for the Enphase system and single inverters.

This Venus OS driver emulates a MultiPlus-II in order to see the right AC load and flow, if you have the MQTT PV, Grid and Battery drivers but no MultiPlus-II.

Integrate Shelly single phase energy meters into Victron Energies Venus OS

Enable readout of a DSMR grid meter and export the data to Home Assistant and a Victron Energies GX device D-Bus

This Venus OS driver gets the data from MQTT and displays it as EV charger.

This Venus OS driver gets the data from MQTT and displays it as temperature sensor.

Integration of Fronius Smartmeters into the Victron VenusOS environment via dbus

This driver/package allows you to use ngrok on Venus OS and configure it over GUI. Ngrok allows you to access a specific port without forwarding the port.

Integrate Deye Sun G3 pv micro inverter into Victron Energies Venus OS

Integrate Fronius Smart meter into Victron Energies Venus OS

Integrate Eastron grid meters into Victron Energies Venus OS