-
-
Notifications
You must be signed in to change notification settings - Fork 415
Torch CUDA Notes
Install latest version of CUDA that matches major version of your PyTorch
For example, CUDA 11.8 can be used with PyTorch compiled for CUDA 11.7, but CUDA 12.0 cannot
Install latest version of cuDNN compatible with chosen CUDA version
Currently best options are CUDA 11.8 with cuDNN 8.7
Note that CUDA 12 is not yet supported by PyTorch
Note: Uninstall torch
and triton
before attempting any new installs
pip uninstall torch torchvision torchaudio triton -y
PyTorch 2.0.0 compiled with CUDA 11.8:
pip install torch torchaudio torchvision triton --force --extra-index-url https://download.pytorch.org/whl/cu118
pip show torch
2.0.0
PyTorch 2.1-nightly compiled with CUDA 12.1:
pip install --pre torch triton torchvision torchaudio --force --extra-index-url https://download.pytorch.org/whl/nightly/cu121
pip show torch
2.1.0.dev20230305+cu118
Read https://github.com/pytorch/pytorch#from-source
Note: PyTorch heavily relies on Anaconda for its build process
Torch comes with its own version of cuDNN
which is great for simplicity,
but not so great if your performance is 50% of what's expected
First make sure that your cuDNN
is installed correctly and in ldconfig
can find it
Then, remove cuDNN
from torch
package:
rm ~/.local/lib/python3.10/site-packages/torch/lib/libcudnn*
Now check if correct cuDNN
libraries are found
sudo ldconfig ldconfig -p | grep cudnn
And if not, modify LD_LIBRARY_PATH
to include cuDNN
libraries and repeat ldconfig
command
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/cuda/lib64
Recommended if you are using PyTorch 2.0
xformers
is a library of optimized attention kernels for PyTorch
Highly recommended for significant performance boost when using Pytorch
1.x
Not required when using Pytorch
2.0
When using release version of PyTorch 1.13.1, simply install xformers
from PyPI
:
pip install -U xformers
Otherwise, build process takes a bit longer...
Set your environment so xformers
can be optimized for your GPU
python -c 'import torch; print(torch.cuda.get_device_capability())' (8, 6) export TORCH_CUDA_ARCH_LIST="8.6"
Rebuild xformers
sudo apt install pybind11-dev
pip install ninja setuptools pybind11
pip install -v -U git+https://github.com/facebookresearch/xformers.git@main#egg=xformers
This will compile xformers
for your system which is preferred over using pre-built wheel
Check functionality using:
python -m xformers.info
Make sure that all fields marked with memory_efficient
are set to available
There are separate torchtriton
and triton
packages as well as different sources for triton
To avoid confusion, uninstall any existing triton
packages before installing torch
and install triton
in the same install command as torch
Default version of triton
package is good-enough for a fully functional system
unless you want to further experiment with torch dynamo
just-in-time compiler,
in which case you may need to build & install https://github.com/openai/triton package from source
Recommended to run in FP16 mode with Dynamo accelerators
But...Dynamo is only supported with Torch 2.0!
Otherwise, run without Dynamo
pip install accelerate accelerate config
In which compute environment are you running? This machine
Which type of machine are you using? No distributed training
Do you want to run your training on CPU only (even if a GPU is available)? [yes/NO]: no
Do you wish to optimize your script with torch dynamo?[yes/NO]: yes
Which dynamo backend would you like to use? inductor <- only if using torch 2.0+, otherwise no
Do you want to use DeepSpeed? [yes/NO]: no
What GPU(s) (by id) should be used for training on this machine as a comma-seperated list? [all]: all
Do you wish to use FP16 or BF16 (mixed precision)? fp16
accelerate test
PyTorch is NOT compatible with Python 3.11, use 3.10 instead
Just install as usual, but also possible to build from sources
You can install python
itself from sources
Download from https://www.python.org/downloads/source/
Configure:
export CFLAGS="-march=native -O3 -pipe -Wno-unused-value -Wno-empty-body -DNDEBUG"
./configure --prefix /usr --enable-optimizations --with-lto --enable-loadable-sqlite-extensions
time make -j32
Check:
./python --version
./python -c 'import sysconfig; print(sysconfig.get_config_var("PY_CFLAGS"))'
Do side-by-side install:
sudo make altinstall
sudo update-alternatives --install /bin/python3 python3 /bin/python3.11 100
sudo update-alternatives --list python3
Switch to new python
:
sudo update-alternatives --config python3
python -m pip install --upgrade pip
python -m pip uninstall torch torchaudio triton pytorch_triton -y python -m pip install --pre torch triton torchaudio torchvision --extra-index-url https://download.pytorch.org/whl/nightly/cu118 --force
python -c 'import torch; print(torch.path, torch.version)'
Requirements:
- Latest versions of Windows: not included in RTM
Note: Insider builds are no longer required as CUDA support is present in Beta builds - Updated WSL kernel:
wsl --update
, minimum 4.19.121 recommended 5.15.74 - Updated nVidia drivers: minimum 460 recommended 510
Links:
Install both CUDA
and cuDNN
- Note: Do not install drivers if running in VM, let host drivers be as-is
Driver can be higher than runtime, but not opposite
- Example: driver 510 supports Cuda 12 and is compatible with Cuda 11.6)
Install using either:
- Add nVidia repository and install using
apt
- Download installer and install manually
Is CUDA detected and versions:
apt list cuda*
List is long, but minimum packages are:
cuda/now 11.6.1-1
cuda-11-6/now 11.6.1-1
cuda-cccl-11-6/now 11.6.55-1
cuda-command-line-tools-11-6/now 11.6.1-1
cuda-compiler-11-6/now 11.6.1-1
cuda-cudart-11-6/now 11.6.55-1
cuda-cupti-11-6/now 11.6.112-1
cuda-libraries-11-6/now 11.6.1-1
cuda-nvcc-11-6/now 11.6.112-1
cuda-runtime-11-6/now 11.6.1-1
cuda-toolkit-11-6/now 11.6.1-1
cuda-tools-11-6/now 11.6.1-1
apt list libcudnn*
libcudnn8/now 8.3.2.44-1+cuda11.5
nvidia-smi
NVIDIA-SMI 510.85.02 Driver Version: 526.98 CUDA Version: 12.0
head /usr/local/cuda/version.json
"cuda" : {
"name" : "CUDA SDK",
"version" : "11.6.1"
},
Test:
git clone https://github.com/NVIDIA/cuda-samples
Edit Makefile
as needed to specify compute level and run make
Samples/1_Utilities/deviceQuery
Device 0: "NVIDIA GeForce RTX 3060"
CUDA Driver Version / Runtime Version 12.0 / 11.6
CUDA Capability Major/Minor version number: 8.6
Total amount of global memory: 12288 MBytes (12884377600 bytes)
(028) Multiprocessors, (128) CUDA Cores/MP: 3584 CUDA Cores
GPU Max Clock rate: 1777 MHz (1.78 GHz)
Memory Clock rate: 7501 Mhz
Memory Bus Width: 192-bit
...
Stable-Diffusion requires CUDA
level SM86 so version older than 11 are insufficient
Install:
pip3 install tensorflow
Tensorflow dynamically links to CUDA libraries, so as long as major version matches, it should work (e.g. Tensorflow 2.10 uses CUDA 11.x). But mixing different major versions between Tensorflow and CUDA does not work
Check:
wget https://raw.githubusercontent.com/vladmandic/tfjs-utils/main/src/tfinfo.py
python src/tfinfo.py
sysconfig: [
('cpu_compiler', '/dt9/usr/bin/gcc'),
('cuda_compute_capabilities', ['sm_35', 'sm_50', 'sm_60', 'sm_70', 'sm_75', 'compute_80']),
('cuda_version', '11.2'),
('cudnn_version', '8'),
('is_cuda_build', True),
('is_rocm_build', False),
('is_tensorrt_build', True)
]
gpu device: PhysicalDevice(name='/physical_device:GPU:0', device_type='GPU') {
'compute_capability': (8, 6),
'device_name': 'NVIDIA GeForce RTX 3060'
}
logical device: LogicalDevice(name='/device:GPU:0', device_type='GPU')
Install PyTorch linked to exact major/minor version of CUDA:
pip3 uninstall torch torchvision torchaudio
pip3 install torch torchvision torchaudio --extra-index-url https://download.pytorch.org/whl/cu116
Note that cu116
at the end refers to CUDA
11.6 which should match CUDA
installation on your system
Check:
wget https://raw.githubusercontent.com/vladmandic/tfjs-utils/main/src/torchinfo.py python torchinfo.py
torch version: 1.12.1+cu116
cuda available: True
cuda version: 11.6
cuda arch list: ['sm_37', 'sm_50', 'sm_60', 'sm_70', 'sm_75', 'sm_80', 'sm_86']
device: NVIDIA GeForce RTX 3060
Download
git clone https://github.com/facebookresearch/xformers.git cd xformers git submodule update --init --recursive
Compile
export FORCE_CUDA="1" export TORCH_CUDA_ARCH_LIST=8.6 pip install ninja pyre-extensions einops python setup.py build develop python setup.py bdist_wheel
Install
pip install dist/* python -m xformers.info