Update README.md

README.md

@@ -1,2 +1,85 @@
 # FASTMiner-SG
 Support x16r/x16s/xevan/x17/phi/tribus/aergo/polytimos/geek/skunk algos. It contains 1% dev fee. 
+
+To get best perfomance start with -X 256, also you could add -g 2, to execute algos in 2 threads, it could give you better perfomance. Also use -w 256 for phi, polytimos, skunk, c11 algos
+
+/* These options are available from commandline only */
+
+--config|-c,load_config,"Load a JSON-format configuration file","See example.conf for an example configuration.
+
+--default-config", set_default_config,"Specify the filename of the default config file, "Loaded at start and used when saving without a name.
+
+--remote-config-retry",set_int_0_to_9999, opt_show_intval, &opt_remoteconf_retry, "Number of times to retry downloading remote config file. Default: 3
+
+--remote-config-wait",set_int_0_to_9999, opt_show_intval, &opt_remoteconf_wait,
+"Time in seconds to wait between download retries of remote config files. Default: 10secs"
+
+--remote-config-usecache",opt_set_bool, &opt_remoteconf_usecache,"Use cached copy of the remote config file when download fails. Default: No",
+
+--help|-h
+
+--ndevs|-n,display_devs, &nDevs,"Display number of detected GPUs, OpenCL platform ","information, and exit")
+
+--version|-V,opt_version_and_exit, packagename,Display version and exit.
+
+/* These options are available from config file or commandline */
+
+--algorithm|--kernel|-k,set_default_algorithm,"Set mining algorithm and most common defaults, default: scrypt"
+--api-allow,set_api_allow,"Allow API access only to the given list of [G:]IP[/Prefix] addresses[/subnets]"
+--api-description,set_api_description,"Description placed in the API status header, default: FASTMiner-SG version
+--api-groups",set_api_groups,"API one letter groups G:cmd:cmd[,P:cmd:*...] defining the cmds a groups can use"
+--api-listen",opt_set_bool, &opt_api_listen,"Enable API, default: disabled"
+--api-mcast",opt_set_bool, &opt_api_mcast,"Enable API Multicast listener, default: disabled"
+--api-mcast-addr",set_api_mcast_addr,"API Multicast listen address"
+--api-mcast-code",set_api_mcast_code,"Code expected in the API Multicast message, don't use '-'"
+--api-mcast-des",set_api_mcast_des,"Description appended to the API Multicast reply, default: ''")
+--api-mcast-port",set_int_1_to_65535, opt_show_intval, &opt_api_mcast_port,"API Multicast listen port"
+--api-network",opt_set_bool, &opt_api_network,"Allow API (if enabled) to listen on/for any address, default: only 127.0.0.1"
+--api-port",set_int_1_to_65535, opt_show_intval, &opt_api_port,"Port number of miner API"),
+--auto-fan",opt_set_bool, &opt_autofan,"Automatically adjust all GPU fan speeds to maintain a target temperature"
+--auto-gpu",opt_set_bool, &opt_autoengine,"Automatically adjust all GPU engine clock speeds to maintain a target temperature"
+--balance",set_balance, &pool_strategy,"Change multipool strategy from failover to even share balance"),
+--blake-compact", opt_set_bool, &opt_blake_compact,"Set SPH_COMPACT_BLAKE64 for Xn derived algorithms (Can give better hashrate for some GPUs)")
+
+--compact",opt_set_bool, &opt_compact,"Use compact display without per device statistics"
+
+--debug|-D",enable_debug, &opt_debug,"Enable debug output"
+--debug-log",opt_set_bool, &opt_debug,"Enable debug logging when stderr is redirected to file"
+--default-profile",set_default_profile,"Set Default Profile"
+--description",set_pool_description,"Pool description"
+--device|-d",set_default_devices,"Select device to use, one value, range and/or comma separated (e.g. 0-2,4) default: all"),
+
+--disable-rejecting",opt_set_bool, &opt_disable_pool,"Automatically disable pools that continually reject shares"
+
+--expiry|-E",set_int_0_to_9999, opt_show_intval, &opt_expiry,"Upper bound on how many seconds after getting work we consider a share from it stale"
+
+  // event options
+--event-on",set_event_type,"Select event type to perform task on"
+--event-runcmd",set_event_runcmd,"Command to perform on event"),
+--event-reboot",set_event_reboot, "Reboot the system on event"),
+--event-reboot-delay",set_event_reboot_delay,"Delay in seconds to wait before rebooting"
+--event-quit",set_event_quit,"Quit FASTMiner-SG on event"
+--event-quit-message",set_event_quit_message,"Quit message when quitting FASTMiner-SG on event"
+--failover-only",opt_set_bool, &opt_fail_only,"Don't leak work to backup pools when primary pool is lagging"),
+--failover-switch-delay",set_int_1_to_65535, opt_show_intval, &opt_fail_switch_delay,"Delay in seconds before switching back to a failed pool"),
+--fix-protocol",opt_set_bool, &opt_fix_protocol,"Do not redirect to a different getwork protocol (eg. stratum)"),
+--gpu-dyninterval",set_int_1_to_65535, opt_show_intval, &opt_dynamic_interval,"Set the refresh interval in ms for GPUs using dynamic intensity"),
+--gpu-platform",set_int_0_to_9999, opt_show_intval, &opt_platform_id,"Select OpenCL platform ID to use for GPU mining"),
+--gpu-threads|-g",set_default_gpu_threads, "Number of threads per GPU - one value or comma separated list (e.g. 1,2,1)"),
+--gpu-engine",set_default_gpu_engine,"GPU engine (over)clock range in Mhz - one value, range and/or comma separated list (e.g. 850-900,900,750-850)"),
+--gpu-fan",set_default_gpu_fan,"GPU fan percentage range - one value, range and/or comma separated list (e.g. 0-85,85,65)"),
+--gpu-map",set_gpu_map,"Map OpenCL to ADL device order manually, paired CSV (e.g. 1:0,2:1 maps OpenCL 1 to ADL 0, 2 to 1)"),
+--gpu-memclock",set_default_gpu_memclock,"Set the GPU memory (over)clock in Mhz - one value for all or separate by commas for per card"),
+--gpu-memdiff",set_gpu_memdiff,"Set a fixed difference in clock speed between the GPU and memory in auto-gpu mode"),
+--gpu-powertune",set_default_gpu_powertune,"Set the GPU powertune percentage - one value for all or separate by commas for per card"),
+--gpu-reorder",opt_set_bool, &opt_reorder,"Attempt to reorder GPU devices according to PCI Bus ID"),
+--gpu-vddc",set_default_gpu_vddc,"Set the GPU voltage in Volts - one value for all or separate by commas for per card"),
+--hamsi-expand-big",set_int_1_to_10, opt_show_intval, &opt_hamsi_expand_big,"Set SPH_HAMSI_EXPAND_BIG for X13 derived algorithms (1 or 4 are common)"),
+--hamsi-short",opt_set_bool, &opt_hamsi_short,"Set SPH_HAMSI_SHORT for X13 derived algorithms (Can give better hashrate for some GPUs)"),
+--monero|--pool-monero",set_monero, NULL,"Use Monero Cryptonight variants as appropriate"),
+--keccak-unroll",set_int_0_to_9999, opt_show_intval, &opt_keccak_unroll,"Set SPH_KECCAK_UNROLL for Xn derived algorithms (Default: 0)"),
+--kernelfile",set_default_kernelfile,"Set the algorithm kernel source file (without file extension)."),
+--lookup-gap",set_default_lookup_gap,"Set GPU lookup gap for scrypt mining, comma separated"),
+--luffa-parallel",opt_set_bool, &opt_luffa_parallel,"Set SPH_LUFFA_PARALLEL for Xn derived algorithms (Can give better hashrate for some GPUs)"),
+--benchmark",opt_set_bool, &opt_benchmark,"Enables benchmark mode for x16r/x16s. Hardcodes the hash order to run each hash function exactly once"),
+