V0.8.0 Aliases support with custom delays (min/max) for each key event

[wasiejen]

NEW: Added support for Aliases in Key Groups (genamed that file also)

You can now put things like this into the key groups file (directly via menu or just edit the key_groups.txt):

• -k, p|10, o|5, i|15|3
  • when k is pressed , send p with a max delay of 10, then o with may delay of 5, then i with min delay of 3 and max of 10 (order of delays is free - it fetches the smaller one as min and the bigger one as max.
• +o,r,e,v,e,r,s,e,d,-left_shift,w,o,r,l,d,+left_shift
  • when o is released writes "reversedWORLD"
• -o,-left_shift,h,e,l,l,o,+left_shift,w,o,r,l,d
  • when o is pressed writes "HELLOWORLD"
• --,-+,++
  • when minus is pressed sends a + press and release
• +-,o,k
  • when minus is released writes "ok"

some explanation:

• `` nothing in front of a key is a press and release (normal)
• - in front of a key is a press (down)
• + in front of a key is a release (up)
• # in front of a key is a release and a key (reversed input)
• | behind a key is the the max delay for this single key (e.g. -k|10 -> press k with a max delay of 10)
• |*max*|*min* defines min and max delay (e.g. -k|10|2 or -k|2|10 -> press k with a max delay of 10 and min delay of 2)

This is only usable in key groups. not supported in tap_groups yet.

See #21 for further info

Update of ReadMe will come later. :-D

pls give feedback in the discussion - would like to see for what you use this functionality :-D

---

This discussion was created from the release V0.8.0 Aliases support with custom delays (min/max) for each key event.