snappy-test.h

// Copyright 2011 Google Inc. All Rights Reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
//     * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//     * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
//     * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Various stubs for the unit tests for the open-source version of Snappy.

#ifndef THIRD_PARTY_SNAPPY_OPENSOURCE_SNAPPY_TEST_H_
#define THIRD_PARTY_SNAPPY_OPENSOURCE_SNAPPY_TEST_H_

#include <cstdarg>
#include <cstdio>
#include <iostream>
#include <string>

#include "snappy-stubs-internal.h"

#ifdef HAVE_SYS_MMAN_H
#include <sys/mman.h>
#endif

#ifdef HAVE_SYS_RESOURCE_H
#include <sys/resource.h>
#endif

#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#endif

#ifdef HAVE_WINDOWS_H
#include <windows.h>
#endif

#ifdef HAVE_GTEST

#include <gtest/gtest.h>
#undef TYPED_TEST
#define TYPED_TEST TEST
#define INIT_GTEST(argc, argv) ::testing::InitGoogleTest(argc, *argv)

#else

// Stubs for if the user doesn't have Google Test installed.

#define TEST(test_case, test_subcase) \
  void Test_ ## test_case ## _ ## test_subcase()
#define INIT_GTEST(argc, argv)

#define TYPED_TEST TEST
#define EXPECT_EQ CHECK_EQ
#define EXPECT_NE CHECK_NE
#define EXPECT_FALSE(cond) CHECK(!(cond))

#endif

#ifdef HAVE_GFLAGS

#include <gflags/gflags.h>

// This is tricky; both gflags and Google Test want to look at the command line
// arguments. Google Test seems to be the most happy with unknown arguments,
// though, so we call it first and hope for the best.
#define InitGoogle(argv0, argc, argv, remove_flags) \
  INIT_GTEST(argc, argv); \
  google::ParseCommandLineFlags(argc, argv, remove_flags);

#else

// If we don't have the gflags package installed, these can only be
// changed at compile time.
#define DEFINE_int32(flag_name, default_value, description) \
  static int FLAGS_ ## flag_name = default_value;

#define InitGoogle(argv0, argc, argv, remove_flags) \
  INIT_GTEST(argc, argv)

#endif

#ifdef HAVE_LIBZ
#include "zlib.h"
#endif

#ifdef HAVE_LIBLZO2
#include "lzo/lzo1x.h"
#endif

namespace {

namespace file {
  int Defaults() { return 0; }

  class DummyStatus {
   public:
    void CheckSuccess() { }
  };

  DummyStatus GetContents(
      const std::string& filename, std::string* data, int /*unused*/) {
    FILE* fp = std::fopen(filename.c_str(), "rb");
    if (fp == NULL) {
      std::perror(filename.c_str());
      std::exit(1);
    }

    data->clear();
    while (!feof(fp)) {
      char buf[4096];
      size_t ret = fread(buf, 1, 4096, fp);
      if (ret == 0 && ferror(fp)) {
        std::perror("fread");
        std::exit(1);
      }
      data->append(std::string(buf, ret));
    }

    std::fclose(fp);

    return DummyStatus();
  }

  inline DummyStatus SetContents(
      const std::string& filename, const std::string& str, int /*unused*/) {
    FILE* fp = std::fopen(filename.c_str(), "wb");
    if (fp == NULL) {
      std::perror(filename.c_str());
      std::exit(1);
    }

    int ret = std::fwrite(str.data(), str.size(), 1, fp);
    if (ret != 1) {
      std::perror("fwrite");
      std::exit(1);
    }

    std::fclose(fp);

    return DummyStatus();
  }
}  // namespace file

}  // namespace

namespace snappy {

#define FLAGS_test_random_seed 301
using TypeParam = std::string;

void Test_CorruptedTest_VerifyCorrupted();
void Test_Snappy_SimpleTests();
void Test_Snappy_MaxBlowup();
void Test_Snappy_RandomData();
void Test_Snappy_FourByteOffset();
void Test_SnappyCorruption_TruncatedVarint();
void Test_SnappyCorruption_UnterminatedVarint();
void Test_SnappyCorruption_OverflowingVarint();
void Test_Snappy_ReadPastEndOfBuffer();
void Test_Snappy_FindMatchLength();
void Test_Snappy_FindMatchLengthRandom();

std::string ReadTestDataFile(const std::string& base, size_t size_limit);

std::string ReadTestDataFile(const std::string& base);

// A std::sprintf() variant that returns a std::string.
// Not safe for general use due to truncation issues.
std::string StrFormat(const char* format, ...);

// A wall-time clock. This stub is not super-accurate, nor resistant to the
// system time changing.
class CycleTimer {
 public:
  CycleTimer() : real_time_us_(0) {}

  void Start() {
#ifdef WIN32
    QueryPerformanceCounter(&start_);
#else
    gettimeofday(&start_, NULL);
#endif
  }

  void Stop() {
#ifdef WIN32
    LARGE_INTEGER stop;
    LARGE_INTEGER frequency;
    QueryPerformanceCounter(&stop);
    QueryPerformanceFrequency(&frequency);

    double elapsed = static_cast<double>(stop.QuadPart - start_.QuadPart) /
        frequency.QuadPart;
    real_time_us_ += elapsed * 1e6 + 0.5;
#else
    struct timeval stop;
    gettimeofday(&stop, NULL);

    real_time_us_ += 1000000 * (stop.tv_sec - start_.tv_sec);
    real_time_us_ += (stop.tv_usec - start_.tv_usec);
#endif
  }

  double Get() {
    return real_time_us_ * 1e-6;
  }

 private:
  int64_t real_time_us_;
#ifdef WIN32
  LARGE_INTEGER start_;
#else
  struct timeval start_;
#endif
};

// Minimalistic microbenchmark framework.

typedef void (*BenchmarkFunction)(int, int);

class Benchmark {
 public:
  Benchmark(const std::string& name, BenchmarkFunction function)
      : name_(name), function_(function) {}

  Benchmark* DenseRange(int start, int stop) {
    start_ = start;
    stop_ = stop;
    return this;
  }

  void Run();

 private:
  const std::string name_;
  const BenchmarkFunction function_;
  int start_, stop_;
};
#define BENCHMARK(benchmark_name) \
  Benchmark* Benchmark_ ## benchmark_name = \
          (new Benchmark(#benchmark_name, benchmark_name))

extern Benchmark* Benchmark_BM_UFlat;
extern Benchmark* Benchmark_BM_UIOVec;
extern Benchmark* Benchmark_BM_UValidate;
extern Benchmark* Benchmark_BM_ZFlat;
extern Benchmark* Benchmark_BM_ZFlatAll;
extern Benchmark* Benchmark_BM_ZFlatIncreasingTableSize;

void ResetBenchmarkTiming();
void StartBenchmarkTiming();
void StopBenchmarkTiming();
void SetBenchmarkLabel(const std::string& str);
void SetBenchmarkBytesProcessed(int64_t bytes);

#ifdef HAVE_LIBZ

// Object-oriented wrapper around zlib.
class ZLib {
 public:
  ZLib();
  ~ZLib();

  // Wipe a ZLib object to a virgin state.  This differs from Reset()
  // in that it also breaks any state.
  void Reinit();

  // Call this to make a zlib buffer as good as new.  Here's the only
  // case where they differ:
  //    CompressChunk(a); CompressChunk(b); CompressChunkDone();   vs
  //    CompressChunk(a); Reset(); CompressChunk(b); CompressChunkDone();
  // You'll want to use Reset(), then, when you interrupt a compress
  // (or uncompress) in the middle of a chunk and want to start over.
  void Reset();

  // According to the zlib manual, when you Compress, the destination
  // buffer must have size at least src + .1%*src + 12.  This function
  // helps you calculate that.  Augment this to account for a potential
  // gzip header and footer, plus a few bytes of slack.
  static int MinCompressbufSize(int uncompress_size) {
    return uncompress_size + uncompress_size/1000 + 40;
  }

  // Compresses the source buffer into the destination buffer.
  // sourceLen is the byte length of the source buffer.
  // Upon entry, destLen is the total size of the destination buffer,
  // which must be of size at least MinCompressbufSize(sourceLen).
  // Upon exit, destLen is the actual size of the compressed buffer.
  //
  // This function can be used to compress a whole file at once if the
  // input file is mmap'ed.
  //
  // Returns Z_OK if success, Z_MEM_ERROR if there was not
  // enough memory, Z_BUF_ERROR if there was not enough room in the
  // output buffer. Note that if the output buffer is exactly the same
  // size as the compressed result, we still return Z_BUF_ERROR.
  // (check CL#1936076)
  int Compress(Bytef *dest, uLongf *destLen,
               const Bytef *source, uLong sourceLen);

  // Uncompresses the source buffer into the destination buffer.
  // The destination buffer must be long enough to hold the entire
  // decompressed contents.
  //
  // Returns Z_OK on success, otherwise, it returns a zlib error code.
  int Uncompress(Bytef *dest, uLongf *destLen,
                 const Bytef *source, uLong sourceLen);

  // Uncompress data one chunk at a time -- ie you can call this
  // more than once.  To get this to work you need to call per-chunk
  // and "done" routines.
  //
  // Returns Z_OK if success, Z_MEM_ERROR if there was not
  // enough memory, Z_BUF_ERROR if there was not enough room in the
  // output buffer.

  int UncompressAtMost(Bytef *dest, uLongf *destLen,
                       const Bytef *source, uLong *sourceLen);

  // Checks gzip footer information, as needed.  Mostly this just
  // makes sure the checksums match.  Whenever you call this, it
  // will assume the last 8 bytes from the previous UncompressChunk
  // call are the footer.  Returns true iff everything looks ok.
  bool UncompressChunkDone();

 private:
  int InflateInit();       // sets up the zlib inflate structure
  int DeflateInit();       // sets up the zlib deflate structure

  // These init the zlib data structures for compressing/uncompressing
  int CompressInit(Bytef *dest, uLongf *destLen,
                   const Bytef *source, uLong *sourceLen);
  int UncompressInit(Bytef *dest, uLongf *destLen,
                     const Bytef *source, uLong *sourceLen);
  // Initialization method to be called if we hit an error while
  // uncompressing. On hitting an error, call this method before
  // returning the error.
  void UncompressErrorInit();

  // Helper function for Compress
  int CompressChunkOrAll(Bytef *dest, uLongf *destLen,
                         const Bytef *source, uLong sourceLen,
                         int flush_mode);
  int CompressAtMostOrAll(Bytef *dest, uLongf *destLen,
                          const Bytef *source, uLong *sourceLen,
                          int flush_mode);

  // Likewise for UncompressAndUncompressChunk
  int UncompressChunkOrAll(Bytef *dest, uLongf *destLen,
                           const Bytef *source, uLong sourceLen,
                           int flush_mode);

  int UncompressAtMostOrAll(Bytef *dest, uLongf *destLen,
                            const Bytef *source, uLong *sourceLen,
                            int flush_mode);

  // Initialization method to be called if we hit an error while
  // compressing. On hitting an error, call this method before
  // returning the error.
  void CompressErrorInit();

  int compression_level_;   // compression level
  int window_bits_;         // log base 2 of the window size used in compression
  int mem_level_;           // specifies the amount of memory to be used by
                            // compressor (1-9)
  z_stream comp_stream_;    // Zlib stream data structure
  bool comp_init_;          // True if we have initialized comp_stream_
  z_stream uncomp_stream_;  // Zlib stream data structure
  bool uncomp_init_;        // True if we have initialized uncomp_stream_

  // These are used only with chunked compression.
  bool first_chunk_;       // true if we need to emit headers with this chunk
};

#endif  // HAVE_LIBZ

}  // namespace snappy

DECLARE_bool(run_microbenchmarks);

static inline void RunSpecifiedBenchmarks() {
  if (!FLAGS_run_microbenchmarks) {
    return;
  }

  std::fprintf(stderr, "Running microbenchmarks.\n");
#ifndef NDEBUG
  std::fprintf(stderr,
               "WARNING: Compiled with assertions enabled, will be slow.\n");
#endif
#ifndef __OPTIMIZE__
  std::fprintf(stderr,
               "WARNING: Compiled without optimization, will be slow.\n");
#endif
  std::fprintf(stderr, "Benchmark            Time(ns)    CPU(ns) Iterations\n");
  std::fprintf(stderr, "---------------------------------------------------\n");

  snappy::Benchmark_BM_UFlat->Run();
  snappy::Benchmark_BM_UIOVec->Run();
  snappy::Benchmark_BM_UValidate->Run();
  snappy::Benchmark_BM_ZFlat->Run();
  snappy::Benchmark_BM_ZFlatAll->Run();
  snappy::Benchmark_BM_ZFlatIncreasingTableSize->Run();

  std::fprintf(stderr, "\n");
}

#ifndef HAVE_GTEST

static inline int RUN_ALL_TESTS() {
  std::fprintf(stderr, "Running correctness tests.\n");
  snappy::Test_CorruptedTest_VerifyCorrupted();
  snappy::Test_Snappy_SimpleTests();
  snappy::Test_Snappy_MaxBlowup();
  snappy::Test_Snappy_RandomData();
  snappy::Test_Snappy_FourByteOffset();
  snappy::Test_SnappyCorruption_TruncatedVarint();
  snappy::Test_SnappyCorruption_UnterminatedVarint();
  snappy::Test_SnappyCorruption_OverflowingVarint();
  snappy::Test_Snappy_ReadPastEndOfBuffer();
  snappy::Test_Snappy_FindMatchLength();
  snappy::Test_Snappy_FindMatchLengthRandom();
  std::fprintf(stderr, "All tests passed.\n");

  return 0;
}

#endif  // HAVE_GTEST

// For main().
namespace snappy {

// Logging.

#define LOG(level) LogMessage()
#define VLOG(level) true ? (void)0 : \
    snappy::LogMessageVoidify() & snappy::LogMessage()

class LogMessage {
 public:
  LogMessage() { }
  ~LogMessage() {
    std::cerr << std::endl;
  }

  LogMessage& operator<<(const std::string& msg) {
    std::cerr << msg;
    return *this;
  }
  LogMessage& operator<<(int x) {
    std::cerr << x;
    return *this;
  }
};

// Asserts, both versions activated in debug mode only,
// and ones that are always active.

#define CRASH_UNLESS(condition) \
    SNAPPY_PREDICT_TRUE(condition) ? (void)0 : \
    snappy::LogMessageVoidify() & snappy::LogMessageCrash()

#ifdef _MSC_VER
// ~LogMessageCrash calls std::abort() and therefore never exits. This is by
// design, so temporarily disable warning C4722.
#pragma warning(push)
#pragma warning(disable:4722)
#endif

class LogMessageCrash : public LogMessage {
 public:
  LogMessageCrash() { }
  ~LogMessageCrash() {
    std::cerr << std::endl;
    std::abort();
  }
};

#ifdef _MSC_VER
#pragma warning(pop)
#endif

// This class is used to explicitly ignore values in the conditional
// logging macros.  This avoids compiler warnings like "value computed
// is not used" and "statement has no effect".

class LogMessageVoidify {
 public:
  LogMessageVoidify() { }
  // This has to be an operator with a precedence lower than << but
  // higher than ?:
  void operator&(const LogMessage&) { }
};

#define CHECK(cond) CRASH_UNLESS(cond)
#define CHECK_LE(a, b) CRASH_UNLESS((a) <= (b))
#define CHECK_GE(a, b) CRASH_UNLESS((a) >= (b))
#define CHECK_EQ(a, b) CRASH_UNLESS((a) == (b))
#define CHECK_NE(a, b) CRASH_UNLESS((a) != (b))
#define CHECK_LT(a, b) CRASH_UNLESS((a) < (b))
#define CHECK_GT(a, b) CRASH_UNLESS((a) > (b))
#define CHECK_OK(cond) (cond).CheckSuccess()

}  // namespace snappy

#endif  // THIRD_PARTY_SNAPPY_OPENSOURCE_SNAPPY_TEST_H_