请问如何通过 访问控制-接口控制-access point(比如phy0-ap0) 分开走节点和直连？

[krwt]

我试着用 访问控制-接口控制-phy0-ap0来区分走节点和直连的设备，比如一个SSID走节点，另一个SSID全部直连，但是配置好后所有的SSID还是走了节点。请问这是我配置问题还是按ssid控制访问不支持？

xray日志看了没用，因为访问控制应该是xray之前解决的，有没有什么办法可以debug这个问题？访问控制是nftables管的吗？
谢谢！
tcpdump 显示的确是正确的interface

13:11:29.858858 br-lan Out ARP, Request who-has MacBookAir.lan tell Ruby.lan, length 28
13:11:29.858866 phy1-ap1 Out ARP, Request who-has MacBookAir.lan tell Ruby.lan, length 28
13:11:29.865537 phy1-ap1 P   ARP, Reply MacBookAir.lan is-at 82:4e:dc:d1:e7:2c (oui Unknown), length 28
13:11:29.865544 br-lan In  ARP, Reply MacBookAir.lan is-at 82:4e:dc:d1:e7:2c (oui Unknown), length 28
13:11:52.498860 br-lan Out ARP, Request who-has MacBookAir.lan tell Ruby.lan, length 28
13:11:52.498868 phy1-ap1 Out ARP, Request who-has MacBookAir.lan tell Ruby.lan, length 28
13:11:52.513588 phy1-ap1 P   ARP, Reply MacBookAir.lan is-at 82:4e:dc:d1:e7:2c (oui Unknown), length 28
13:11:52.513595 br-lan In  ARP, Reply MacBookAir.lan is-at 82:4e:dc:d1:e7:2c (oui Unknown), length 28

openwrt-23.05
passwall 4.78-3