Skip to content

Latest commit

 

History

History
36 lines (25 loc) · 1.1 KB

README-RGB.md

File metadata and controls

36 lines (25 loc) · 1.1 KB

Zintercom

Firmware options

Each firmware version has 6 variants. For different zigbee modules and power supply.

  • EndDevice - for battery power

  • Router - for external power

  • PA1 - for E18-MS1PA1 module

  • PA2 - for E18-MS1PA2 module

  • no suffix - for E18-MS1 module

Using battery as power supply

The firmware for the battery has the following differences.

  • The device is mostly asleep.
  • Wakes up once every 30 minutes (parameter - time_report) and sends a report.
  • Zigbee commands are only executed when the device wakes up.
  • RGB lights up for 2 seconds after changing the mode with the button.
  • When the "no sound" mode is turned on, the constant consumption is 3 mA. In this mode AAA batteries will last 1-2 months.

RGB Software

Release 2.0.0 support new RGB hardware and legacy hardware with one Led.

RGB Hardware

Schematics and PCB - https://oshwlab.com/Utyf/zcom

Files to reproduce