Custom components for Home Assistant

Xiaomi IR Climate Component

Requirements

Xiaomi IR Remote component need to be enabled and configured

Configuration variables:

Variable	Required	Description
remote	yes	entity_id of the Xiaomi IR Remote device
commands	yes	Commands list (see below)
name	no	Name of climate component
temp_sensor	no	entity_id for a temperature sensor, temp_sensor.state must be temperature
power_template	no	template that returns status of climete, must returns boolean value
min_temp	no	Set minimum available temperature (default: 16)
max_temp	no	Set maximum available temperature (default: 32)
target_temp	no	Set initial target temperature (default: 24)
target_temp_step	no	Set target temperature step (default: 1)
operation_mode	no	Set initial default operation mode (default: cool)
fan_mode	no	Set initial default fan mode (default: auto)
customize - operation_list - fan_list	no	List of options to customize - List of operation modes (default: off, heat, cool, auto) - List of fan modes (default: low, medium, high, auto)

Basic Example:

climate:
  - platform: xiaomi_remote
    name: Air Conditioner
    remote: remote.xiaomi_miio_192_168_10_101
    commands: !include Roda-YKR-H-102E.yaml

Custom Example:

climate:
  - platform: xiaomi_remote
    name: Air Conditioner
    remote: remote.xiaomi_miio_192_168_10_101
    commands: !include Roda-YKR-H-102E.yaml
    temp_sensor: sensor.co2mon_temperature
    power_template: "{{ states('sensor.plug_power_158d0002366887') | float > 50 }}"
    min_temp: 16
    max_temp: 32
    target_temp: 24
    target_temp_step: 1
    operation_mode: cool
    fan_mode: auto
    customize:
      operation_list:
        - 'off'
        - cool
        - heat
        - dry
        - fan_only
        - auto
      fan_list:
        - low
        - medium
        - high
        - auto

How to make your configuration YAML file

• Use remote.xiaomi_miio_learn_command to get commands from your remote.
• Create YAML file same as Roda-YKR-H-102E.yaml with your commands.
  • Required command off ('off': <command>)
  • Optional commands: operation/fan_mode/temperature (available nesting: operation/fan_mode/temperature, operation/fan_mode, operation)
  • 'off' commands must be in quotes

Example:

'off': <raw_command>
cool:
  low:
    16: <raw_command>
    17: <raw_command>
    ...
heat:
  low: <raw_command>
  high: <raw_command>
dry: <raw_command>

Xiaomi Plug Power Sensor

Component provides sensors with current power of Xiaomi Plugs. Also, component fixes long updates of in_use and load_power attributes of plug (default update interval is 5-8 minutes)

Example:

sensor:
  - platform: xiaomi_plug_power

CO2Mon Sensor

Component provides two sensors - temperature and CO2 from USB CO2 monitor

Requirements

The libusb library must be installed.
On linux (including Raspberry Pi) and official docker container you can install it from apt:

sudo apt-get install libusb-1.0-0-dev

Example:

sensor:
  - platform: co2mon