wm-check-wmbus.yaml

---
## ------------------------------------------------------------------
## TESTCASE FOR WMBUS METER + CC1101 for WATERMETES
##
## This version has no sensors and shows only
## the logs for checking wM-Bus and CC1101.
##
## DO NOT USE THIS CONFIGURATION FOR PRODUCTION
##
## ------------------------------------------------------------------
substitutions:

  # device and application settings
  device_name_short: "water-meter"
  device_description: "Watermeter CC1101 wmbus Test"
  projectname: "CC1101 wmbus Test.Watermeter"
  appversion: "2.0.7"

# logger settings
  log_level: "VERBOSE"  # not that logging need memory, so in production mode use "WARN"
  log_wmbus: "VERBOSE" # Loglevel for wmbus meters component
  log_baudrate: "0" # 0 disable uart logger messages


  # Device configuration (select your device)

  ## ---------------------------------------------------
  ##
  ##               GDO0
  ##                 o
  ##                 7
  ##                 | GD02         ╭-------o 2 (GND)
  ##                 |  6
  ##                 |  o           |
  ##                 |  |           |
  ##        ╭――x――x――o――o――x――x――x――o――╮
  ##        │       D1  D2          -  │
  ##        │                          │
  ##        │       D1MINI WEMOS       │
  ##   ANT  │                          │ USB
  ##        │                          │
  ##        │           D5 D6 D7 D8 +  │
  ##        ╰――x――x――x――o――o――o――o――o――╯
  ##                    |  |  |  |  |
  ##                    |  |  |  |  ╰-----o  1 (+3.3V)
  ##                    |  o  |  o
  ##                    |  5  |  8
  ##                    | MISO| CSN
  ##                    o     o
  ##                    4     3
  ##                   CLK   MOSI
  ##
  ## --------------------------------------------------
  BOARD: d1_mini
  CC1101_3: D7 # MOSI
  CC1101_4: D5 # CLK
  CC1101_5: D6 # MISO
  CC1101_6: D2 # GD02
  CC1101_7: D1 # GDO0
  CC1101_8: D8 # CSN

## ----------------------------------------------------------------
## HARDWARE: D1 MINI ESP8266 80MHz, 80KB RAM, 4MB Flash
## ----------------------------------------------------------------
esp8266:
  board: ${BOARD}
  restore_from_flash: true

  ## ---------------------------------------------------
  ##
  ##               GDO0
  ##                 o
  ##                 7
  ##                 | GD02
  ##     (GND) 2  o  |  6
  ##              |  |  o
  ##              |  |  |
  ##        ╭――x――o――o――o――x――x――x――x――╮
  ##        │     - D1  D2             │
  ##        │                          │
  ##        │       D1MINI ESP32       │
  ##   USB  │                          │ ANT
  ##        │                          │
  ##        │  +  D8 D7 D6 D5          │
  ##        ╰――x――x――o――o――o――x――x――x――╯
  ##           |  |  |  |  |
  ##           |  |  |  |  |
  ##    3.3V 1 o  |  |  |  o
  ##              |  |  |  4 CLK
  ##      CSN (8) o  |  |
  ##        MOSI (3) o  o
  ##                    5
  ##                  MISO
  ##
  ## --------------------------------------------------
  ## esp32:
  ##  board: wemos_d1_mini32
  ##  CC1101_3: D7 # MOSI
  ##  CC1101_4: D5 # CLK
  ##  CC1101_5: D6 # MISO
  ##  CC1101_6: D2 # GD02
  ##  CC1101_7: D1 # GDO0
  ##  CC1101_8: D8 # CSN

  ##  wmbus:
  ##    cs_pin : GPIO5
  ##    gdo0_pin : GPIO21
  ##    gdo2_pin : GPIO22
  ##    miso_pin : GPIO19
  ##    clk_pin : GPIO18
  ##    mosi_pin : GPIO23

  ## ------------------------------------------------------------------
  ##
  ##                                                               o 1 (3.3V)
  ##                                                               |
  ##   ╭――x――x――x――x――x――x――x――x――x――x――x――x――x――x――x――x――x――x――x――o―╮
  ##   |                                                             |
  ## - | 5v               az-delivery-devkit-v4                      | -- ANT
  ##   |                                                             |
  ##   |                          16 17 5  18 19               23    |
  ##   ╰――x――x――x――x――x――x――x――x――o――x――o――o――o――o――o――o――o――o――o――o―╯
  ##                              |  |  |  |  |                 |   |
  ##                              o  |  |  o  |                 |   ╰-o - 2 (GND)
  ##                              7  o  |  4  o                 o
  ##                            GDO0 6  | CLK 5                 3
  ##                               GD02 o    MISO              M0SI
  ##                                    8
  ##                                   CSN
  ##
  ## ------------------------------------------------------------------
  # BOARD: az-delivery-devkit-v4
  # CC1101_3: GPIO23  # M0SI
  # CC1101_4: GPIO18  # CLK
  # CC1101_5: GPIO19  # MISO
  # CC1101_6: GPIO17  # GD02
  # CC1101_7: GPIO16  # GDO0
  # CC1101_8: GPIO05  # CSN

## ----------------------------------------------------------------
## HARDWARE az-delivery-devkit-v4
##          ESP32 240MHz, 520KB RAM, 4MB Flash
## ----------------------------------------------------------------
# esp32:
#   board: ${BOARD}
#   framework:
#     type: arduino


  ## ------------------------------------------------------------------
  ##
  ##
  ##       GDO0                 MOSI
  ##         7              MISO  3
  ##         o GD02       CLK  5  o  CSN
  ##         |  6           4  o  |  8           ╭-------o 2 (GND)
  ##         |  o           o  |  |  o           |  ╭----o 1 (3.3V)
  ##         |  |           |  |  |  |           |  |
  ##   ╭――x――o――o――x――x――x――o――o――o――o――x――x――x――o――o―╮
  ##   |     D1 D2          D5 D6 D7 D8               |
  ##   |                                              |
  ## - | ANT              NODEMCU V3                  | -- USB
  ##   |                                              |
  ##   |                                              |
  ##   ╰――x――x――x――x――x――x――x――x――x――x――x――x――x――x――x―╯
  ##
  ##
  ##
  ## ------------------------------------------------------------------
  # BOARD: nodemcuv2
  # CC1101_3: D7  # MOSI
  # CC1101_4: D5  # CLK
  # CC1101_5: D6  # MISO
  # CC1101_6: D2  # GD02
  # CC1101_7: D1  # GDO0
  # CC1101_8: D8  # CSN

# ----------------------------------------------------------------
# HARDWARE:  NODEMCU V3 ESP8266 80MHz, 80KB RAM, 4MB Flash
# ----------------------------------------------------------------
# esp8266:
#   board: ${BOARD}
#   restore_from_flash: true

## ----------------------------------------------------------------
## ESPHOME APPLICATION
## ----------------------------------------------------------------
esphome:
  name: ${device_name_short}
  comment: ${device_description}
  # Automatically add the mac address to the name
  # so you can use a single firmware for all devices
  name_add_mac_suffix: false
  project:
    name: ${projectname}
    version: ${appversion}
  build_path: ./build/${device_name_short}
  on_boot:
    priority: -100.00
    then:
      - logger.log:
          level: INFO
          tag: "system"
          format: "BOOTMESSAGE:${device_name_short} API is connected, Device ready!"
  on_shutdown:
    priority: 700
    then:
      - logger.log:
          level: ERROR
          tag: "system"
          format: "BOOTMESSAGE:${device_name_short} is down!"

## ----------------------------------------------------------------
## External components
## ----------------------------------------------------------------
external_components:
  # uses the latest version from SzczepanLeon
  - source: github://SzczepanLeon/esphome-components@main
    refresh: 0s
    components: [wmbus]

## ---------------------------------------------------
## WIFI Settings 
## ---------------------------------------------------
wifi:
  networks:
   # unifi accesspoint 2.4Ghz
    - ssid: !secret ssid4_name
      password: !secret ssid4_pswd
      priority: 1
    # office apple capsulate accesspoint 2.4Ghz
    - ssid: !secret ssid3_name
      password: !secret ssid3_pswd
      priority: 2  
    # living room apple capsulate accesspoint 2.4Ghz
    - ssid: !secret ssid2_name
      password: !secret ssid2_pswd
      priority: 3
  domain: !secret domain

## ---------------------------------------------------
## mDNS Component
## ---------------------------------------------------
mdns:
  # if mDNS is disabled, they will no longer be able to automatically find your devices.
  disabled: false

## ---------------------------------------------------
## Captive portal component
## ---------------------------------------------------
captive_portal:

## ---------------------------------------------------
## LOGGER COMPONENT
## ---------------------------------------------------
logger:
  id: appslogger
  level: ${log_level}
  baud_rate: ${log_baudrate}
  logs:
    wmbus: ${log_wmbus}
    wMBus-lib: ${log_wmbus}

## ---------------------------------------------------
## OTA Updates
## ---------------------------------------------------
ota:
  password: !secret ota_pswd
  safe_mode: false
  on_begin:
    then:
      - logger.log:
          format: "OTA Start"
          tag: "OTA"
          level: WARN
  on_progress:
    then:
      - logger.log:
          level: WARN
          tag: "OTA"
          format: "OTA progress %0.1f%%"
          args: ["x"]
  on_end:
    then:
      - logger.log:
          format: "OTA End"
          tag: "OTA"
          level: WARN
  on_error:
    then:
      - logger.log:
          format: "OTA update error %d"
          tag: "OTA"
          level: ERROR
          args: ["x"]

## ---------------------------------------------------
## COMPONENT WEBSERVER
## ---------------------------------------------------
web_server:
  port: 80
  version: 2
  js_url: !secret webserver_jsurl

## ---------------------------------------------------
## SNTP Time server
## ---------------------------------------------------
time:
  - platform: sntp
    id: time_sntp
    timezone: Europe/Berlin
    servers:
      - !secret local_sntp
      - 0.at.pool.ntp.org
      - 0.pool.ntp.org
      # - 1.pool.ntp.org

## ---------------------------------------------------
## CC11001 WMBUS TO DEVICE (selected board)
## ---------------------------------------------------
wmbus:
  mosi_pin: ${CC1101_3}  # MOSI Attached to Hardware SPI controller MOSI SPI Interface
  miso_pin: ${CC1101_5}  # MISO Attached to Hardware SPI controller MISO SPI Interface
  clk_pin: ${CC1101_4}   # SCK  Attached to Hardware SPI controller CLK
  cs_pin: ${CC1101_8}    # CSN  Attached to Hardware SPI controller
  gdo0_pin: ${CC1101_7}  # GDO0 Clock output. High Impedance !
  gdo2_pin: ${CC1101_6}  # GDO2 status signals. High Impedance !

  # Shows telegrams from all watermeters in log.
  log_unknown: True

## Nothing follow here, output only on log console