copycat.rules

(rules PCB copycat
  (snap_angle 
    fortyfive_degree
  )
  (autoroute_settings
    (fanout off)
    (autoroute on)
    (postroute on)
    (vias on)
    (via_costs 50)
    (plane_via_costs 5)
    (start_ripup_costs 100)
    (start_pass_no 99)
    (layer_rule F.Cu
      (active on)
      (preferred_direction horizontal)
      (preferred_direction_trace_costs 1.0)
      (against_preferred_direction_trace_costs 3.0)
    )
    (layer_rule B.Cu
      (active on)
      (preferred_direction vertical)
      (preferred_direction_trace_costs 1.0)
      (against_preferred_direction_trace_costs 1.5)
    )
  )
  (rule
    (width 250.0)
    (clear 200.2)
    (clear 125.0 (type smd_to_turn_gap))
    (clear 50.0 (type smd_smd))
  )
  (padstack "Via[0-1]_600:400_um"
    (shape
      (circle F.Cu 600.0 0.0 0.0)
    )
    (shape
      (circle B.Cu 600.0 0.0 0.0)
    )
    (attach off)
  )
  (via 
    "Via[0-1]_600:400_um" "Via[0-1]_600:400_um" default
  )
  (via 
    "Via[0-1]_600:400_um-kicad_default" "Via[0-1]_600:400_um" default
  )
  (via_rule
    default "Via[0-1]_600:400_um"
  )
  (via_rule
    "kicad_default" "Via[0-1]_600:400_um-kicad_default"
  )
  (class default
    (clearance_class default)
    (via_rule default)
    (rule
      (width 250.0)
    )
    (circuit 
      (use_layer F.Cu B.Cu)
    )
  )
  (class "kicad_default"
    GND OSC32IN OSC32OUT "Net-(C3-Pad1)" OSCIN OSCOUT +3V3 AREF
    VBAT VBUS "Net-(D1-Pad1)" "Net-(D3-Pad2)" "Net-(D4-Pad2)" "Net-(P4-Pad3)" "Net-(P4-Pad4)" "Net-(P4-Pad2)"
    EN "Net-(R2-Pad1)" RST BOOT0 "Net-(R5-Pad1)" "Net-(R6-Pad2)" IO1 IO0
    CD "Net-(R10-Pad2)" "Net-(R11-Pad2)" "Net-(U1-Pad5)" VBATRC "Net-(U3-Pad2)" IO6 A5
    TX RX A4 A3 DI A2 A1 A0
    IO3 IO2 SCLK "Net-(U3-Pad29)" "Net-(U3-Pad34)" "Net-(U3-Pad37)" IO4 SCK
    MISO MOSI SCL DO IO5 SDA CS
    (clearance_class default)
    (via_rule kicad_default)
    (rule
      (width 250.0)
    )
    (circuit 
      (use_layer F.Cu B.Cu)
    )
  )
)